PRODUCT DESCRIPTION

VC 700 Embossed is a Heavy Duty Self-Adhering Multi-Layer Zero-Perm Jacketing System. Victory Clad™ 700 provides the “Ultimate Protection” for ductwork and piping systems. VC 700 is designed to perform in the most demanding applications where High Mechanical Abuse is possible.  VC 700 Zero Perm products have Higher Strength and Higher Punctures Resistance properties than most products on the market. VC 700 maintain a Zero Perm and Excellent Weatherproofing providing the ultimate protect against corrosion under insulation (CUI). VC 700 is “Chemical Resistant” with “Self-Cleaning” properties for long term performance and appearance. VC 700 Series can be fabricated like traditional metal jacketing, but faster and easier leading to lower overall costs. The technically advanced adhesive system is suitable for applications in Extreme Temperature conditions (-94 F to +284 F).

PRODUCT DATA

Product Thickness: Value 20.0 Mils.

Tensile Strength: Value 64 lbs/in. Standard: EN527-3

Elongation: Value 35% at break. Standard: EN527-3

Water Permeability: Value 0.00 Perm. Standard: ASTM F1249 ISO 15106-2

Puncture Resistance: Value 68 lbs. Standard: DIN 14477

Service Temperature: Value -94˚F to +284˚F

Application Temperature: Value -22˚F to +266˚F

UV Testing: Value 10 Years+. Standard: ASTM G 26A ISO 4892-2

Fire Rating: Value 15/35. Standard: ASTM-E84/UL723 . IMO Resolution MSC 307 (88)  (2010 FTP Code). Value 10/15. Standard: CAN/ULC - S102

CHARACTERISTICS & ADVANTAGES

• External & internal applications
• Proven UV resistance, 10 years+   
• Increased puncture resistance    
• Salt water resistant   
• Resistant to a range of chemicals   
• Meets requirement of FDA & CFIA for indirect food contact  
• Extends serviceable life of infrastructure and lowers maintenance costs 

PRODUCT RANGES & SIZES

VC 701 Ultimate - Aluminum Embossed. Widths available: 39 Inches. Length: 25 Yards. 

VC 703 Ultimate - White Embossed. Widths available: 39 Inches.  Length: 25 Yards. 

VC 705 Ultimate - Gray Embossed. Widths available: 39 Inches.  Length: 25 Yards. 

GENERAL INSTALLATION GUIDELINES

Surface Preparation

All surfaces are to be dry, clean free from dirt, dust, grease, oils, silicones and other contaminates. All exposed fibrous insulation should be covered by foil tape and/or matching facing tapes. All tapes should be  properly secured to provide a smooth and even surface to allow an even and smooth application of Victory Clad™  jacketing. All insulation materials must be securely fastened to industry standards to prevent movement or shifting of the insulation material.

Application

Victory Clad™ 700 is pressure sensitive and requires the use of a plastic squeegee applicator to properly activate the adhesive.  Victory Clad™ requires firm and even pressure is to achieve a permanent bond. When placing the cut piece of Victory Clad™ into position, partially peel back the liner to allow correct positioning and then rub down using your hand, continue to peel back the liner while applying pressure evenly to prevent or minimize creasing and air pockets. Once the full piece has been evenly applied, use the plastic applicator to apply pressure evenly to the entire surface. Continue with your next piece of Victory Clad™ making sure you achieve a minimum of a 3" overlap on the previous piece and apply pressure to ensure a strong weatherproof seal.  Victory Clad™ should be applied using standard water shed practices. Ductwork over 24" wide should be pitched to allow proper water drainage. All finished lap and butt joints are to be sealed using the Victory Clad™ 600ST seam tape. This method is an essential part of the warranty. Detailed installation instructions are available upon request.  
 

METHOD STATEMENT & SHELF LIFE STATEMENT

Victory Clad Inc., provides detailed method statements for use in various applications, and are available upon request. These must be referred to prior to commencing work. Shelf life 2 years plus.

LEGAL NOTICES

The information and in particular the recommendations relating to the applications and end-use of Victory Clad products are given in good faith based on Victory Clad™  years of applications and experience and current knowledge of the products materials, substrates and actual Installations. Any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product's suitability for the intended application and purpose. Victory Clad™ reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the Current Product Data Sheets.